Description
Description
Specifications
- Model: D1803-CR-E4B
- Emission Regulation: Tier 4/ Stage IIIA
- Cyl.: 3
- Combust. System: DI
- Aspiration: Naturally Aspirated
- After- Weight treatment: DOC + DPF
- Rated Speed (rpm): 2700
- Industrial Use – Gross Intermittent (kW): 28.0
- Industrial Use – Gross Intermittent (HP): 37.5
- Industrial Use – Net Intermittent (kW): 26.8
- Industrial Use – Net Intermittent (HP): 35.9
- Industrial Use – Net Continuous (kW): 23.3
- Industrial Use – Net Continuous (HP): 31.2
- Bore – mm (in): 87.0 (3.43)
- Stroke – mm (in): 102.4 (4.031)
- Displacement – L (cu.in): 1.826 (111.40)
- Length – mm (in): 746 (29.4)
- Width – mm (in): 536 (21.1)
- Height – mm (in): 721 (28.4)
- Dry Weight – kg (lb): 185 (407.0)
- Engine model: D1703-M-DI-E4B
- Emission regulation: EPA/CARB Tier 4 (NRTC/NTE test mode) + EU Stage V
- Type: Vertical, water cooled 4-cycle diesel engine
- Cylinders: 3
- Bore and stroke mm (in): 87.0 x 92.4 (3.43 x 3.64)
- Displacement L (cu.in): 1.647 (100.5)
- Aspiration: Naturally aspirated
- Rated output / speed*1 kW (HP) / rpm: 18.5 (24.8) / 2200
- Maximum torque / speed*1 Nm (lb-ft) / rpm: 97.4 (71.8) / 1500
- Combustion system: Direct injection
- Fuel system: In-line pump
- Length x Width x Height*2 (without aftertreatment unit) mm (in): 547 x 495 x 679 (21.5 x 19.5 x 26.7)
- Dry weight kg (lb): 148 (326)
Features and Benefits
- Emissions: The D1703-M-DI engine complies with the EPA/CARB Tier 4 emissions regulations.
- Durable Power: The Kubota 03-M Series is well known for its industrial applications. With numerous features such as a built-in solenoid, low fan position, and single-side serviceability, this engine provides excellent performance and flexibility. The cooling water passages between the cylinder bores features Kubota’s original casting technology as a countermeasure against the heat load caused by high power density, providing both superior endurance and reliable engine performance. The D1703-M engine offers a seamless transition from EPA Tier 2 to EPA interim Tier 4 by maintaining the same footprint and hardware mounting points with minimal performance changes from EPA Tier 2 engines.
- Clean and Quiet Power: The fuel injection pressure has been increased to achieve lower particulate matter (PM) levels. The half-float valve cover and MoS2-coated pistons reduce noise levels compared to conventional diesel engines and decrease vibrations transmitted from the valve area, providing enhanced noise reduction.
- Options: Kubota 03-M Series engines offer side power take-off (PTO) in response to the trend of the use of hydraulic control devices in industrial machines. A hydraulic pump can be installed at the two side PTO locations. Indirect-Injection engines are also available.
NOTES:
Specifications are subject to change without notice. Dimensions and dry weight are according to Kubota’s standard specification. Dimensions and weight depend on completed specifications. *1: SAE J1995 gross intermittent *2: Exclude cooling fan and exclude aftertreatment unit